Aqua regia extractable trace elements in surface soils of venezuela

Surface soils (0–15 cm) were sampled at 10–20 km intervals along two transects in Venezuela. One (1162 km, 70 samples) ran west to east parallel with the Caribbean coastline, the other (920 km, 92 samples) ran south to north from the frontier with Brazil to the Caribbean shore. Sampling took place in both a wet and a dry season. Trace metals were extracted from dried, sieved (<2 mm) soil with boiling aqua regia followed by analysis by ICP or flame AAS. Metal values did not differ significantly between the two seasons and dates were averaged. Geometric mean values for the west–east transect were: Cr=41.5, Cu 17.9, Cs 3.6, Li=13.9, Mn=294, Ni=21.3, Pb=17.4, Sr=39.4, V=60.4 and Zn = 83.7g g^–1, respectively. Similarly, for the south–north transect Cr=21.3, Cu=4.3, Cs=1.1, Li=2.0, Mn=55.7, Ni=4.4, Pb=6.1, Sr=13.3, V=28.2 and Zn=16.7g g^–1, respectively. A classification of samples by lithology showed surface soil composition to be related to rock composition. Metal values were low in the soils in the south of the country, in the Guyana highlands (Gran Sabana). Low Zn contents were prevalent. Lead contents were affected by roadside fallout from vehicles using leaded petrol except that high Pb contents of soils in the Gran Sabana were of more complex origin.     

PBDE,HBCD, and novel brominated flame retardant contamination in sediments from Lake Maggiore (Northern Italy)

The reduction in the use of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCD) has opened the way for the introduction of novel brominated flame retardants (NBFRs) in place of the banned formulations. Important representatives of this group are decabromodiphenyl ethane (DBDPE), 1,2-bis(2,4,6-tribromophenoxy) ethane (BTBPE), hexabromobenzene (HBB), and pentabromoethylbenzene (PBEB). In this study, the contamination due to NBRFs was investigated for the first time in Italy in the sediments of Lake Maggiore. The aim of the research was to characterize in detail the possible presence of temporal trends and/or to identify potential sources of contamination. The study also considered the PBDE and HBCD lake sediment’s current contamination. The analytical results showed that sediments in Lake Maggiore and its tributary rivers had weak concentrations of PBEB, HBB, and BTBPE, but they did not have a negligible/insignificant contamination of HBCD (up to 23.7 ng/g dry weight (d.w.)). The determination of PBDEs in sediments showed that BDE-209 was the predominant congener (up to 217 and 28 ng/g d.w. in river and lake sediments, respectively). DBDPE was detected in the sediments with relevant concentrations (up to 280 ng/g d.w in the River Boesio sediments). The positive correlation of DBDPE with BDE-209 confirmed the wide and important use of this compound in the Lake Maggiore basin and the hypothesis that this compound will soon become one of the most important NBFRs used in Northern Italy. The contamination of Lake Maggiore sediments due to PBDEs, HBCD, and NBFRs were comparable to other worldwide situations.     

Degradation of Post-consumer PLA: Hydrolysis of Polymeric Matrix and Oligomers Stabilization in Aqueous Phase

Degradation of post-consumer PLA to lactic acid was analysed in order to assess the economic feasibility of the PLA chemical recycling process. Hydrolysis of PLA, in batch reactor, was analysed in the temperature range of 443–473 K, under autogenous pressure and a constant PLA to water ratio (equal to approximately 0.11 by weight), without the use of a catalyst. The experimental results suggest that the complete degradation of PLA can be obtained using relatively low reaction-times with the production of a mixture containing the monomer and traces of the dimer of lactic acid. The overall process was modelled using a two-step process: bulk degradation of PLA (in the solid or molten phase) with the solubilisation of low molecular weight oligomers, and their subsequent hydrolysis in water (stabilization). The model describes the trend of oligomer concentrations in the aqueous phase and PLA conversion as a function of time with both high accuracy and agreement with experimental results.     

Traffic aerosol lobar doses deposited in the human respiratory system

Aerosol pollution in urban environments has been recognized to be responsible for important pathologies of the cardiovascular and respiratory systems. In this perspective, great attention has been addressed to Ultra Fine Particles (UFPs?<?100 nm), because they efficiently penetrate into the respiratory system and are capable of translocating from the airways into the blood circulation. This paper describes the aerosol regional doses deposited in the human respiratory system in a high-traffic urban area. The aerosol measurements were carried out on a curbside in downtown Rome, on a street characterized by a high density of autovehicular traffic. Aerosol number-size distributions were measured by means of a Fast Mobility Particle Sizer in the range from 5.6 to 560 nm with a 1 s time resolution. Dosimetry estimates were performed with the Multiple-Path Particle Dosimetry model by means of the stochastic lung model. The exposure scenario close to traffic is represented by a sequence of short-term peak exposures: about 6.6?×?10¹⁰ particles are deposited hourly into the respiratory system. After 1 h of exposure in proximity of traffic, 1.29?×?10¹⁰, 1.88?×?10¹⁰, and 3.45?×?10¹⁰ particles are deposited in the head, tracheobronchial, and alveolar regions. More than 95 % of such doses are represented by UFPs. Finally, according to the greater dose estimated, the right lung lobes are expected to be more susceptible to respiratory pathologies than the left lobes.     

Effects of methanol, ethanol and n-propanol on development of Artemia salina cysts

The current study proposes an ecotoxicological test that makes use of Artemia salina cyst; the results obtained made it possible to calculate the percentage of cyst mortality (no sign of development), and growth inhibition (a delay in normal development), as well as the percentage of larva malformation, and mortality. The dehydrated cysts were directly exposed for forty-eight hours to the action of three alcohols, methanol, ethanol, and n-propanol. No teratogenic or lethal effects on larvae were found at any methanol or ethanol concentrations. Predicted values of effect concentration, EC₁, EC₁₀ and EC₅₀ were calculated from the estimated probit models for larva growth inhibition, GI, and for cyst lethal concentration, LC. At concentrations of 0.21 M methanol and 0.13 M ethanol, there were no signs of alterations in Artemia salina cyst development; these concentrations show a NOEC (No Observed Effect Concentration) value, and properly employed do not interfere with effects due to a given chemical. The n-propanol was only used to verify the extreme resistance of the dried cysts to various environmental factors.     

Pesticide by-products in the Rhône delta (Southern France). The case of 4-chloro-2-methylphenol and of its nitroderivative

A field monitoring campaign for pesticides and their transformation intermediates was carried out in the Rh?ne delta (Southern France). It was evidenced the following transformation sequence: MCPA-->4-chloro-2-methylphenol (CMP)-->4-chloro-2-methyl-6-nitrophenol (CMNP). Interestingly CMP disappeared about as quickly as MCPA, while CMNP was environmentally more persistent than the parent molecules. This is very relevant to the environmental risk associated with the occurrence of these compounds, because the nitration of chlorophenols reduces their acute toxicity but the nitroderivatives could have more marked long-term effects, associated with their genotoxicity. Irradiation experiments suggested that the photonitration of CMP into CMNP involves nitrogen dioxide, generated from the photolysis of nitrate and from the photooxidation of nitrite by ()OH. The photochemistry of Fe(III) species could also play a significant role, but its contribution is still difficult to be quantified. Another important intermediate of CMP transformation is methylnitrophenol (MNP), produced via a dechlorination/nitration pathway, with ortho-cresol as the most likely reaction intermediate.     

The evaluation of stability during the composting of different starting materials: comparison of chemical and biological parameters

Three blends formed by: (i) food processing waste (CP(FP)), (ii) waste water sewage sludge (CP(WW)), and (iii) their mixture (CP(FP+WW)), blended with tree pruning as bulking agent, were composted over 3 months. During composting the blends were monitored for the main physical-chemical characteristics: temperature, oxygen saturation level (O(2)%), pH, total and volatile solids, total organic carbon, and organic nitrogen (N(org)). In addition to the main parameters, the dissolved organic carbon (DOC), the inorganic nitrogen and the Oxygen Uptake Rate (OUR) were monitored. All the mixtures easily reached a peak temperature around 70°C, related to the lowest O(2)%. After 90 d, CP(FP), CP(FP+WW), and CP(WW) showed an organic matter mineralization of 43%, 35% and 33%, respectively; CP(FP) fitted an exponential model while both CP(FP+WW), and CP(WW) fitted a logistic model. During composting an OUR reduction of 79%, 78% and 73% was registered in CP(FP), CP(FP+WW), and CP(WW), respectively; the OUR successfully fitted the adopted exponential model and well reflected the stabilization process in time. The N(org) recovery at the end of the process was positive only in CP(WW) (11.6%). The DOC significantly decreased during the composting process but did not successfully fit any model. The mineral nitrogen did not follow the typical pattern with NH(4)(+) disappearance and NO(3)(-) accumulation. Strong NO(3)(-) losses were evident in all blends, while NH(4)(+) accumulations were detectable only in CP(FP), and CP(FP+WW). The NH(4)(+)/NO(3)(-) ratio did not satisfactorily reflect the composting process over time. The comparison of the first order (exponential) and logistic (sigmoidal) models applied to the OUR and OM course highlights the role of mineral nitrogen as limiting factor during composting of the more stabilized sludge.     

Dimensions and models of contemporary public space management in England

This article discusses the concept of public space management and its evolution in a context of wider changes to urban governance. Public space management is taken as a sphere of urban governance in which conflicting societal demands on, and aspirations for, public space are interpreted through a set of processes and practices. Four interlinked dimensions for public space management are proposed: the co-ordination of interventions; the regulation of uses and conflicts between uses; the definition and deployment of maintenance routines; and investment in public spaces and their services. Within this conceptual framework, the paper looks at recent changes in public space management in England to suggest the emergence of alternative models of management. These are based on the roles ascribed to the state, to private agents and to user organisations, and on different approaches to dealing with the four management dimensions. Although the discussion shows that these models are more than just abstract formulations, and have been used to deal with a variety of public space problems, an important purpose for the paper is to provide an analytical framework through which to examine emergent practices in the management of public space and their potential consequences.